Total
Aquaphor Waterboss 700 Water Softener and Iron remover.
►Most powerful (up to 3 m3 per hour)
►Most economical (from 1 kg of salt per regeneration)
►Most reliable (10 years warranty)
►Most convenient (quick installation)!
Description ...
►Most economical (from 1 kg of salt per regeneration)
►Most reliable (10 years warranty)
►Most convenient (quick installation)!
Description ...
An universal system that includes a mechanical self-cleaning filters, iron removal and water softener WaterBoss 700.
►Most powerful (up to 3 m3 per hour)
►Most economical (from 1 kg of salt per regeneration)
►Most reliable (10 years warranty)
►Most convenient (quick installation)!
Patented design offers three features in one: Flow rate up to 15 L/min. Built-in, self-cleaning, whole-house filter. No cartridges to change. Whole-house large capacity softening. Reduces clear water iron up to 10 mg per L. Is built to give whole-house efficiency. It can soften up to 24 meq/L and reduce up to 10 ppm (parts per million) of ferrous iron, and filter dirt and sediment. This model is the solution for over 95% of all hard water conditions. Offers whole-house softening. It can reduce clear water iron up to 10 ppm. There is a built-in, self-cleaning whole-house filter meaning that there are no cartridges to change. Made in the USA.
WaterBoss 700 - specifications:
Total maximum compensated stiffness (Fe + Mn + Ca), mgeq / l * 70 (24)
The maximum content of iron and manganese ions in water, mg / l 10
PH minimum 6
Type of filling and its amount Filter medium Power Clean
Super Fine Resin - 19.8 L
Salt consumption, kg / Resin capacity, mEq (HC - high capacity) 2.95 / 23140
Salt consumption, kg / Resin capacity, mEq (NOT - high efficiency) 1.14 / 13704
Operating water temperature, ° C 4 - 49
Working productivity, m3 / h 1.5
The size of the filtration tank, cm 26.7 x 35.6
Maximum productivity, m3 / h / pressure drop, atm 2.3 / 0.96
Pressure drop at flow 0.91 m3 / h 0.22
Maximum flow for drainage during regeneration (backwash), m3 / h 0.5
Water pressure (minimum / maximum), atm 1.4 / 8
Minimum required water flow, atm 1.14
The maximum chlorine content, mg / l 1
Type of processor 4-button
Regeneration time, min (HC - high capacity) 33
Regeneration time, min (NOT - high profitability) 18
Water consumption for regeneration, l (HC - high capacity) 95
Water consumption for regeneration, l (NOT - high profitability) 61
Regeneration frequency, days upon request
Salt supply, kg 55
Height, cm 65.4
Base, cm 37.5 x 47.6
Power Supply 220/12 VAC, 1 Phase, 50Hz
Connecting sizes ¾ "NMPT
Gross weight, kg 39
►Most powerful (up to 3 m3 per hour)
►Most economical (from 1 kg of salt per regeneration)
►Most reliable (10 years warranty)
►Most convenient (quick installation)!
Patented design offers three features in one: Flow rate up to 15 L/min. Built-in, self-cleaning, whole-house filter. No cartridges to change. Whole-house large capacity softening. Reduces clear water iron up to 10 mg per L. Is built to give whole-house efficiency. It can soften up to 24 meq/L and reduce up to 10 ppm (parts per million) of ferrous iron, and filter dirt and sediment. This model is the solution for over 95% of all hard water conditions. Offers whole-house softening. It can reduce clear water iron up to 10 ppm. There is a built-in, self-cleaning whole-house filter meaning that there are no cartridges to change. Made in the USA.
WaterBoss 700 - specifications:
Total maximum compensated stiffness (Fe + Mn + Ca), mgeq / l * 70 (24)
The maximum content of iron and manganese ions in water, mg / l 10
PH minimum 6
Type of filling and its amount Filter medium Power Clean
Super Fine Resin - 19.8 L
Salt consumption, kg / Resin capacity, mEq (HC - high capacity) 2.95 / 23140
Salt consumption, kg / Resin capacity, mEq (NOT - high efficiency) 1.14 / 13704
Operating water temperature, ° C 4 - 49
Working productivity, m3 / h 1.5
The size of the filtration tank, cm 26.7 x 35.6
Maximum productivity, m3 / h / pressure drop, atm 2.3 / 0.96
Pressure drop at flow 0.91 m3 / h 0.22
Maximum flow for drainage during regeneration (backwash), m3 / h 0.5
Water pressure (minimum / maximum), atm 1.4 / 8
Minimum required water flow, atm 1.14
The maximum chlorine content, mg / l 1
Type of processor 4-button
Regeneration time, min (HC - high capacity) 33
Regeneration time, min (NOT - high profitability) 18
Water consumption for regeneration, l (HC - high capacity) 95
Water consumption for regeneration, l (NOT - high profitability) 61
Regeneration frequency, days upon request
Salt supply, kg 55
Height, cm 65.4
Base, cm 37.5 x 47.6
Power Supply 220/12 VAC, 1 Phase, 50Hz
Connecting sizes ¾ "NMPT
Gross weight, kg 39
